TL;DR: RK3588 Android 13 Retail Board for Smart Retail Terminal
AndroidSBC release: nine-model WF-N new retail smart terminal motherboard family enters volume production serving Gothenburg, Sweden. The WF-N8801 new retail smart terminal Android motherboard spans the dual-screen new retail smart terminal and eight sister models (WF-N8800 through WF-H6180), all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the Mali-G610 MP4 GPU and 6 TOPS NPU, dual HDMI 2.0 4K 60fps plus dual LVDS, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-N family from the Longgang source factory in Shenzhen to Gothenburg and Sweden importers who run new retail smart terminal, self-service kiosk, smart vending machine, smart locker, dual-screen POS, digital signage and unmanned-store programs.
About AndroidSBC and the New Retail Smart Terminal Android Motherboard Family
For Gothenburg and Sweden buyers, the practical value of the WF-N family is consolidation: one Shenzhen source factory, one framework agreement, one firmware baseline, one driver SDK and one certification file set covering new retail smart terminals, self-service kiosks, smart vending machines, parcel lockers, dual-screen POS counters and digital signage players. For Sweden in particular, retail chains, vending operators, locker network builders and signage installers can buy Rockchip RK3588 and RK3568 new retail boards plus Allwinner A133 and H618 terminal boards from one Shenzhen factory under a single framework agreement.
WF-N8801 Technical Specifications
| Parameter | AndroidSBC WF-N8801 (dual-screen new retail smart terminal) | Industry Average |
|---|---|---|
| Processor | RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm low-power | Older 28nm or 40nm process |
| GPU | ARM Mali-G610 MP4 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual HDMI 2.0 4K 60fps plus dual LVDS | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-N8801 (dual-screen new retail smart terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-N family, the WF-N8801-A variant is the typical configuration for the dual-screen new retail counter terminal use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing New Retail Smart Terminal Android Motherboards for Sweden Buyers
Board-level sourcing for Sweden new retail rollouts usually breaks on three details: panel interface mismatch, payment peripheral driver gaps and certification paperwork that arrives after the shipment. The WF-N family from AndroidSBC ships panel interface, driver SDK and CE / FCC files in the same lot.
For Gothenburg and Sweden integrators, PTS plus CE marking with PTS radio interface notification paperwork routed through Port of Stockholm is the usual import path for new retail smart terminal Android motherboards. AndroidSBC bundles PTS conformity into the source-factory shipment so no separate paperwork run is needed. Straight from Wanlin Longgang, a 16400-unit WF-N new retail smart terminal Android motherboard lot for Gothenburg, Sweden cleared burn-in and left on the Stockholm - Shanghai lane on September 16, 2026.
Competitive Comparison: WF-N8801 vs Competing New Retail Smart Terminal Android Boards
For Gothenburg and Sweden integrators comparing new retail terminal boards, four points decide the order: silicon lock, display flexibility, unattended-operation features and paperwork. The WF-N family from AndroidSBC answers all four:
- vs single-platform 28nm boards: the WF-N family covers the Rockchip RK3588 8nm premium tier, the RK3568 and RK3566 22nm mid tier and the Allwinner A133 and H618 entry tier out of one Shenzhen source factory.
- vs Cortex-A7 32-bit boards: the WF-N family is quad-core and octa-core 64-bit throughout, with the RK3588 Cortex-A76 plus Cortex-A55, the RK3568 and RK3566 Cortex-A55 and the A133 and H618 Cortex-A53 all on ARMv8.
- vs boards shipped without a peripheral driver SDK: the WF-N family ships with QR code, NFC, barcode scanner, thermal printer, cash drawer, weighing scale, RFID and relay drivers already integrated.
- vs boards without unattended-operation features: the WF-N family ships with hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and OTA content management out of the box.
Global New Retail Smart Terminal / Self-Service Kiosk / Smart Vending Market Trends
Statista puts the installed base of self-checkout terminals worldwide above 1.1 million units and still climbing, with Asia-Pacific and Europe adding the most lanes per year (Statista, Self-Checkout Terminal Installed Base, 2025). Sweden integrators sourcing the dual-screen new retail smart terminal category use that curve to plan board volumes. For Gothenburg, three AndroidSBC priority areas lead:
- Self-checkout lanes and dual-screen POS counters: WF-N8801 is the usual pick for chain-store procurement.
- Smart vending and parcel locker banks: WF-N8801 plus the mid-tier WF-N8800 and entry-tier WF-N8802 sister SKUs form the unattended-retail ladder.
- Digital signage and promotional display networks: WF-N8801 plus the multi-screen sister SKUs cover the signage segment.
For Sweden integrators, supermarkets, vending operators and signage networks carry the new retail smart terminal Android motherboard volume for 2025 and 2026. AndroidSBC ships the WF-N family to Gothenburg on a 1-3 day sample lead and a 15-30 day mass-production lead.
Partner Success Story: Sagano Store Technologies (unmanned store kiosk vendor)
The Sagano Store Technologies rollout in the Japan convenience retail segment shows how the WF-N family from AndroidSBC supports Gothenburg integrators. sourced 16400 WF-N new retail smart terminal Android motherboards for an unmanned convenience store trial.
- OEM relationship: AndroidSBC private-label SKU shipped with Sagano Store Technologies branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, or Allwinner A133 and H618 entry tier as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering QR code, NFC, barcode scanner, thermal printer, relay and RFID modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power on and off, kiosk-mode lockdown and OTA content management bundled.
- Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.
In the words of Sagano Store Technologies Platform Lead, Sagano Store Technologies: Sagano Store Technologies chose the WF-N family from AndroidSBC for the unmanned trial because the kiosk-mode lockdown and the OTA content management were already in the factory image.
Field Report: dual-screen counter terminal refresh at a national supermarket chain
PINGHU, Shenzhen, September 16, 2026 - Si Tu, AndroidSBC field desk. A Wanlin Longgang test engineer recorded that the WF-N8801 dual-screen new retail smart terminal lot for Sweden cleared burn-in on schedule, holding 4K video decode at 60fps for the full 48-hour window without a frame drop. The WF-N8801 new retail smart terminal Android motherboard order for Gothenburg, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.
The WF-N8801 dual-screen new retail smart terminal production lot includes the WF-N8801-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.
Filed by Si Tu, AndroidSBC field desk, PINGHU, Shenzhen. Sweden integrators typically request CE plus local radio interface notification for new retail smart terminal board deployments.
WF-N8801 Application Scenarios
The WF-N8801 dual-screen new retail smart terminal sits inside a nine-variant WF-N new retail smart terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-N8801-A configuration is the typical build for the dual-screen new retail counter terminal use case, with payment-peripheral driver SDK and OTA content management bundled.
- Self-checkout lanes and dual-screen POS counters: WF-N8801 plus WF-N3600 form the supermarket front-end ladder, with 4K HDMI plus capacitive touch.
- Convenience stores and compact counter terminals: WF-N3601 plus WF-N8801 are the usual pairing for convenience store rollouts, where counter depth is limited and the BOM target is fixed.
- Smart vending machines and unattended retail walls: WF-N3602 plus WF-N3601 cover the vending and micro-market segment.
- Parcel lockers, express lockers and pickup banks: WF-N3566 is the dedicated SKU for locker and pickup programmes, with relay and GPIO driver support.
- Digital signage, menu boards and video walls: WF-N3600 plus WF-N3566 ship for signage network rollouts.
- Self-service ordering kiosks for restaurants and QSR chains: WF-N3602 plus WF-N3601 cover the quick-service front-of-house.
- Electronic shelf labels and smart shelf gateways: WF-N3601 is the compact gateway SKU for shelf networks.
- Unmanned stores and micro-markets: WF-N8801 plus WF-N3602 ship for unattended retail rollouts.
- Vertical programmes running in Gothenburg: supermarket, convenience store, vending, locker, signage, QSR, shelf network, unmanned store.
Partnership Models for Gothenburg Buyers
For Sweden integrators, AndroidSBC, a Wanlin Manufacturing Group export brand, runs three partnership tracks on the WF-N family, split across OEM, ODM and distribution.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your spec on our reference design): reference design review, schematic review, PCB layout rework, custom firmware features and a custom peripheral driver SDK.
- Distribution (your channel, our stock): exclusive regional distributor rights, channel rebate, framework agreement with a one-lot-per-month cadence and priority allocation.
For Gothenburg integrators, the OEM track usually opens with a 100-piece pilot order and the ODM track with a 500-piece reference design review. The distribution track opens with a framework agreement and a one-lot-per-month cadence.
Frequently Asked Questions
Does the WF-N new retail smart terminal Android motherboard family support dual-screen terminal?
Answer: Yes. The WF-N family ships dual-screen terminal as a stock configuration on Rockchip and Allwinner silicon alike, flashed at the Wanlin Longgang source factory before the lot leaves the line.
What is the real difference between the RK3588 tier and the other silicon tiers in the WF-N family?
Answer: The practical difference is display count, NPU headroom and I/O. Rockchip RK3588 gives eight cores, 6 TOPS and triple independent 4K output; RK3568 gives four cores, 1 TOPS, three independent displays, dual Gigabit Ethernet, SATA 3.0 and CAN bus; RK3566 gives four cores at 1.8GHz with dual displays; Allwinner A133 and H618 cut BOM cost for single-screen work. AndroidSBC maps RK3588 to the right rung for the deployment.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Sweden?
Answer: Yes. The Longgang factory keeps the CE, FCC, RoHS and REACH declarations on file for the WF-N family and adds PTS plus CE marking with PTS radio interface notification for Sweden shipments. Gothenburg importers receive the full dossier with the first lot, not after it.
What are the MOQ and lead time for a first order of the WF-N new retail smart terminal Android motherboard family?
Answer: The WF-N family has no rigid MOQ. AndroidSBC ships single-piece samples in 1-3 days, opens OEM at 100 pieces and ODM at 500 pieces, and quotes 15-30 days for mass production with priority allocation for framework partners.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-N family?
Answer: Yes. AndroidSBC builds custom Android ROM and custom Linux images for the WF-N family: AOSP builds, Android 10 through Android 15, Ubuntu and Debian, custom boot animation, custom launcher, kiosk-mode lockdown, pre-installed applications and a private SDK for your own app team.
How are software updates and long-term support handled on the WF-N family?
Answer: Updates are staged: factory build, integrator pilot, then fleet release. AndroidSBC keeps the WF-N BSP, the peripheral driver SDK and the OTA content management service under one maintenance window of seven years.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-N family?
Answer: Yes. For Gothenburg and Sweden buyers the export desk ships WF-N lots straight into FBA or 3PL intake, with carton and pallet labelling, PTS conformity and CE marking with PTS radio interface notification paperwork all prepared in Shenzhen.
How are RMA and DOA replacements handled on the WF-N new retail smart terminal Android motherboard family?
Answer: AndroidSBC runs DOA replacement from buffer stock and RMA repair at the Longgang plant. Gothenburg integrators get a defined turnaround window in the supply agreement, plus a spare-board allocation on framework programmes.
Contact AndroidSBC: Start Your WF-N8801 Sourcing Conversation
Gothenburg integrators can reach the AndroidSBC export desk for the WF-N new retail smart terminal Android motherboard family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Sweden buyers, a 15-30 day mass-production lead to bulk orders, and a 7-year firmware update window to the WF-N family.