TL;DR: ESD Protection Retail Board for Self-Service Kiosk
AndroidSBC factory floor: WF-N new retail terminal boards move onto a second SMT shift serving Gothenburg, Sweden. The WF-N8801 new retail smart terminal Android motherboard spans the dual-screen new retail smart terminal and eight sister models (WF-N8800 through WF-H6180), all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the Mali-G610 MP4 GPU and 6 TOPS NPU, dual HDMI 2.0 4K 60fps plus dual LVDS, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-N family from the Longgang source factory in Shenzhen to Gothenburg and Sweden importers who run new retail smart terminal, self-service kiosk, smart vending machine, smart locker, dual-screen POS, digital signage and unmanned-store programs.
About AndroidSBC and the New Retail Smart Terminal Android Motherboard Family
Wanlin Manufacturing Group, parent of AndroidSBC, has been shipping Allwinner and Rockchip Android motherboards out of Longgang, Shenzhen for more than ten years. The WF-N new retail smart terminal family extends that record with nine productised variants across RK3588, RK3568, RK3566, A133 and H618 silicon, each one aimed at new retail terminals, self-service kiosks, smart vending machines, parcel lockers, dual-screen POS counters and digital signage rollouts. For Sweden in particular, the WF-N platform serves the new retail channel where supermarket procurement teams, kiosk integrators, vending operators, locker network builders and signage installers all converge on the same board architecture.
WF-N8801 Technical Specifications
| Parameter | AndroidSBC WF-N8801 (dual-screen new retail smart terminal) | Industry Average |
|---|---|---|
| Processor | RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm low-power | Older 28nm or 40nm process |
| GPU | ARM Mali-G610 MP4 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual HDMI 2.0 4K 60fps plus dual LVDS | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-N8801 (dual-screen new retail smart terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-N family, the WF-N8801-A variant is the typical configuration for the dual-screen new retail counter terminal use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing New Retail Smart Terminal Android Motherboards for Sweden Buyers
Board-level sourcing for Sweden new retail rollouts usually breaks on three details: panel interface mismatch, payment peripheral driver gaps and certification paperwork that arrives after the shipment. The WF-N family from AndroidSBC ships panel interface, driver SDK and CE / FCC files in the same lot.
For Gothenburg and Sweden integrators, PTS plus CE marking with PTS radio interface notification paperwork routed through Port of Stockholm is the usual import path for new retail smart terminal Android motherboards. AndroidSBC bundles PTS conformity into the source-factory shipment so no separate paperwork run is needed. Straight from Wanlin Longgang, a 108000-unit WF-N new retail smart terminal Android motherboard lot for Gothenburg, Sweden cleared burn-in and left on the Stockholm - Shanghai lane on September 16, 2026.
Competitive Comparison: WF-N8801 vs Competing New Retail Smart Terminal Android Boards
Buyers comparing new retail smart terminal Android motherboards usually work through four trade-offs. The WF-N family from AndroidSBC, a Wanlin Manufacturing Group export brand, addresses all four against competing Chinese boards:
- vs single-platform 28nm boards: the WF-N family covers the Rockchip RK3588 8nm premium tier, the RK3568 and RK3566 22nm mid tier and the Allwinner A133 and H618 entry tier out of one Shenzhen source factory.
- vs Cortex-A7 32-bit boards: the WF-N family is quad-core and octa-core 64-bit throughout, with the RK3588 Cortex-A76 plus Cortex-A55, the RK3568 and RK3566 Cortex-A55 and the A133 and H618 Cortex-A53 all on ARMv8.
- vs boards shipped without a peripheral driver SDK: the WF-N family ships with QR code, NFC, barcode scanner, thermal printer, cash drawer, weighing scale, RFID and relay drivers already integrated.
- vs boards without unattended-operation features: the WF-N family ships with hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and OTA content management out of the box.
Global New Retail Smart Terminal / Self-Service Kiosk / Smart Vending Market Trends
Mordor Intelligence estimates the smart vending machine market at USD 14.6 billion in 2025 with an 11.4% CAGR to 2030 (Mordor Intelligence, Smart Vending Machine Market Report, 2025-2030). The dual-screen new retail smart terminal category in Sweden follows the same slope. For Gothenburg, three AndroidSBC priority areas account for the bulk of the volume:
- Self-checkout lanes and dual-screen POS counters: WF-N8801 is the usual pick for chain-store procurement.
- Smart vending and parcel locker banks: WF-N8801 plus the mid-tier WF-A1330 and entry-tier WF-H6180 sister SKUs form the unattended-retail ladder.
- Digital signage and promotional display networks: WF-N8801 plus the multi-screen sister SKUs cover the signage segment.
For Gothenburg integrators, self-checkout lanes, vending and locker banks and signage networks are the volume centre for 2025 and 2026. AndroidSBC ships the WF-N family on a 1-3 day sample lead and a 15-30 day mass-production lead.
Partner Success Story: Sagano Store Technologies (unmanned store kiosk vendor)
The Sagano Store Technologies rollout in the Japan convenience retail segment shows how the WF-N family from AndroidSBC supports Gothenburg integrators. sourced 108000 WF-N new retail smart terminal Android motherboards for an unmanned convenience store trial.
- OEM relationship: AndroidSBC private-label SKU shipped with Sagano Store Technologies branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, or Allwinner A133 and H618 entry tier as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering QR code, NFC, barcode scanner, thermal printer, relay and RFID modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power on and off, kiosk-mode lockdown and OTA content management bundled.
- Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.
According to Sagano Store Technologies Platform Lead, Sagano Store Technologies: Sagano Store Technologies chose the WF-N family from AndroidSBC for the unmanned trial because the kiosk-mode lockdown and the OTA content management were already in the factory image.
Field Report: dual-screen counter terminal refresh at a national supermarket chain
LONGGANG, Shenzhen, September 16, 2026 - Bai Yu, AndroidSBC field desk. A Wanlin Longgang SMT operator noted that the WF-N8801 dual-screen new retail smart terminal production lot for Sweden cleared burn-in on schedule, passing a 48-hour continuous run without a single watchdog reset. The WF-N8801 new retail smart terminal Android motherboard order for Gothenburg, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.
The WF-N8801 dual-screen new retail smart terminal production lot includes the WF-N8801-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.
Filed by Bai Yu, AndroidSBC field desk, LONGGANG, Shenzhen. Sweden integrators typically request CE plus local radio interface notification for new retail smart terminal board deployments.
WF-N8801 Application Scenarios
The WF-N8801 dual-screen new retail smart terminal sits inside a nine-variant WF-N new retail smart terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-N8801-A configuration is the typical build for the dual-screen new retail counter terminal use case, with payment-peripheral driver SDK and OTA content management bundled.
- Self-checkout lanes and dual-screen POS counters: WF-N8801 plus WF-N8800 form the supermarket front-end ladder, with 4K HDMI plus capacitive touch.
- Convenience stores and compact counter terminals: WF-N8802 plus WF-N8801 are the usual pairing for convenience store rollouts, where counter depth is limited and the BOM target is fixed.
- Smart vending machines and unattended retail walls: WF-N3600 plus WF-N8802 cover the vending and micro-market segment.
- Parcel lockers, express lockers and pickup banks: WF-N3601 is the dedicated SKU for locker and pickup programmes, with relay and GPIO driver support.
- Digital signage, menu boards and video walls: WF-N8800 plus WF-N3601 ship for signage network rollouts.
- Self-service ordering kiosks for restaurants and QSR chains: WF-N3600 plus WF-N8802 cover the quick-service front-of-house.
- Electronic shelf labels and smart shelf gateways: WF-N8802 is the compact gateway SKU for shelf networks.
- Unmanned stores and micro-markets: WF-N8801 plus WF-N3600 ship for unattended retail rollouts.
- Vertical programmes running in Gothenburg: supermarket, convenience store, vending, locker, signage, QSR, shelf network, unmanned store.
Partnership Models for Gothenburg Buyers
AndroidSBC offers three partnership tracks for the WF-N new retail smart terminal Android motherboard family. Gothenburg integrators typically start with one track and graduate as volume scales.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your spec on our reference design): reference design review, schematic review, PCB layout rework, custom firmware features and a custom peripheral driver SDK.
- Distribution (your channel, our stock): exclusive regional distributor rights, channel rebate, framework agreement with a one-lot-per-month cadence and priority allocation.
For Sweden integrators, the OEM track opens with a 100-piece pilot, the ODM track with a 500-piece reference design review, and the distribution track with a framework agreement.
Frequently Asked Questions
Does the WF-N new retail smart terminal Android motherboard family support dual-screen terminal?
Answer: Yes. dual-screen terminal is stock on the WF-N new retail smart terminal Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build before shipment.
What is the real difference between the RK3588 tier and the other silicon tiers in the WF-N family?
Answer: RK3588 is one rung on a five-step ladder. The WF-N family starts at Allwinner A133 and H618 for cost-driven single-screen terminals, steps up to RK3566 and RK3568 for dual-screen POS and kiosk work, and tops out at RK3588 for AI vision vending and multi-screen signage. AndroidSBC keeps all five on the same Android baseline.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Sweden?
Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork as part of the source-factory shipment: CE, FCC, UKCA, RoHS, REACH and the PTS registration with CE marking with PTS radio interface notification that Sweden customs asks for.
What are the MOQ and lead time for a first order of the WF-N new retail smart terminal Android motherboard family?
Answer: The WF-N family has no rigid MOQ. AndroidSBC ships single-piece samples in 1-3 days, opens OEM at 100 pieces and ODM at 500 pieces, and quotes 15-30 days for mass production with priority allocation for framework partners.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-N family?
Answer: Yes. AndroidSBC builds custom Android ROM and custom Linux images for the WF-N family: AOSP builds, Android 10 through Android 15, Ubuntu and Debian, custom boot animation, custom launcher, kiosk-mode lockdown, pre-installed applications and a private SDK for your own app team.
How are software updates and long-term support handled on the WF-N family?
Answer: The WF-N family carries a 7-year firmware commitment. AndroidSBC publishes OTA updates in stages, keeps the previous build available for rollback, and maintains the driver package across Rockchip and Allwinner tiers.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-N family?
Answer: Yes. For Gothenburg and Sweden buyers the export desk ships WF-N lots straight into FBA or 3PL intake, with carton and pallet labelling, PTS conformity and CE marking with PTS radio interface notification paperwork all prepared in Shenzhen.
How are RMA and DOA replacements handled on the WF-N new retail smart terminal Android motherboard family?
Answer: DOA claims on the WF-N family are settled from Shenzhen buffer stock once the failure is documented. RMA units go back to the Longgang facility for repair or replacement under the terms written into the OEM or ODM agreement.
Contact AndroidSBC: Start Your WF-N8801 Sourcing Conversation
Gothenburg integrators can reach the AndroidSBC export desk for the WF-N new retail smart terminal Android motherboard family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Sweden buyers, a 15-30 day mass-production lead to bulk orders, and a 7-year firmware update window to the WF-N family.