TL;DR: RK3288 POS Android Motherboard for Convenience Store Counter
AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Gothenburg, Sweden. The WF-P3288 POS Android motherboard spans the legacy POS refresh with dual-screen output and eleven sister models in the WF-P series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, dual LVDS output at 1080p, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Gothenburg and Sweden importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
AndroidSBC designs the WF-P POS motherboards around the peripherals that a counter already owns: the thermal printer over RS232 or USB, the barcode scanner, the cash drawer on RJ11, the customer display on a second LVDS lane, and the payment reader on USB or serial. The Gothenburg integrator re-uses the existing harness instead of rewiring the counter. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Gothenburg integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P3288 Technical Specifications
| Parameter | AndroidSBC WF-P3288 (legacy POS refresh with dual-screen output) | Industry Average |
|---|---|---|
| Processor | RK3288 quad-core ARM Cortex-A17 1.8GHz SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 28nm | Older 28nm or 40nm process |
| GPU | Mali-T764 | Older Mali-450 or basic GPU |
| NPU / AI | none | No NPU on competing entry boards |
| Memory | 2GB DDR3 | DDR3 1GB / 2GB on competing boards |
| Storage | 16GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual LVDS output at 1080p | Single HDMI 1080p only on competing boards |
| Touch support | 5-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 10 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3288 (legacy POS refresh with dual-screen output) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-P family, the WF-P3288-A variant is the typical configuration for the installed base refresh programme use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Sweden Buyers
Most Gothenburg buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.
Dual-screen is a hardware capability on the WF-P family, not a marketing line. The RK3576 and RK3568 tiers carry independent framebuffers on two lanes, so the cashier screen runs the transaction while the customer display runs its own content at its own resolution. The 1st container of WF-P boards for Gothenburg left the Longgang dock on September 23, 2026 carrying 17800 units, routed through the Stockholm - Shanghai lane with the compliance file and the peripheral driver set already packed.
Competitive Comparison: WF-P3288 vs Competing POS Android Boards
The WF-P family was specified against the failure modes Gothenburg chains reported on previous rollouts, which is why the comparison reads the way it does.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
The Sweden picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Gothenburg integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.
- Entry counter tier: WF-P3288 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P3600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P3601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The eight-tier WF-P line exists because Gothenburg rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.
Partner Success Story: Siam Counter Holdings (convenience and pharmacy POS integrator)
The Siam Counter Holdings rollout in the Southeast Asian retail segment shows how the WF-P family from AndroidSBC supports Gothenburg integrators. Siam Counter Holdings rolled out 17800 WF-P boards across 210 convenience and pharmacy counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Siam Counter Holdings branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.
In the words of Siam Counter Holdings Chief Engineer for Southeast Asian Retail: Siam Counter Holdings moved to the WF-P family after the previous supplier changed eMMC parts mid-contract, and 17800 boards into the Gothenburg estate have held one frozen BOM.
Field Report: installed base refresh across a discount chain
NANSHAN, September 23, 2026 - Chu Lin, AndroidSBC field desk. The WF-P3288 shipped with staged OTA enabled, so the Sweden team can pilot an update on ten lanes before releasing it across the estate. The WF-P3288 POS Android motherboard order for Gothenburg, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.
The WF-P3288 legacy POS refresh with dual-screen output production lot includes the WF-P3288-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.
Filed by Chu Lin, AndroidSBC field desk, NANSHAN. Sweden integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3288 Application Scenarios
The WF-P3288 legacy POS refresh with dual-screen output sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3288-A configuration is the typical build for the installed base refresh programme use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3288 drives the cashier screen while the second lane carries the customer display or the promotion wall in Gothenburg.
- Convenience and small format stores: the WF-P1330 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P6180 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P5270 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Gothenburg: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Gothenburg Buyers
AndroidSBC does not force a track on Sweden partners. The three below are the ones that actually get used.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
All three tracks give Gothenburg partners the same thing underneath: a factory-built board, a frozen BOM and a firmware window measured in years rather than months.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a legacy POS refresh with dual-screen output?
Answer: Yes - legacy POS refresh with dual-screen output is supported across the WF-P line, and the Gothenburg configuration is locked as the reference for later lots so re-orders behave identically.
Which silicon tiers are available in the WF-P family for Sweden buyers?
Answer: Eight silicon tiers are offered, and the RK3288 platform sits in the middle of the range. Each tier carries the same peripheral interface contract, so a Gothenburg partner can move between them without re-writing drivers.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: It can. The WF-P family is specified so one board carries the full counter harness: printer, scanner, drawer, customer display and payment reader, with no expansion card required.
What is the minimum order quantity and the sample lead time for Sweden?
Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.
How are firmware updates delivered to a Sweden estate after deployment?
Answer: The OTA channel is staged and reversible. A Gothenburg chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.
What shipping terms does AndroidSBC support for Sweden orders?
Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Gothenburg partner picks the term and AndroidSBC books the lane.
What happens if a board fails in the field in Sweden?
Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the Gothenburg call-off stock or the next production slot.
Contact AndroidSBC: Start Your WF-P3288 Sourcing Conversation
Gothenburg integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Sweden buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.